Wireless security

Hand Carving Painted Elephant Key Chain India Art ,



Types of unauthorized access

Accidental association

Unauthorized access to company wireless and wired networks can come from a number of different methods and intents. One of these methods is referred to as ccidental association. When a user turns on a computer and it latches on to a wireless access point from a neighboring company overlapping network, the user may not even know that this has occurred. However, it is a security breach in that proprietary company information is exposed and now there could exist a link from one company to the other. This is especially true if the laptop is also hooked to a wired network.

Malicious association

alicious associations are when wireless devices can be actively made by crackers to connect to a company network through their cracking laptop instead of a company access point (AP). These types of laptops are known as oft APs and are created when a cracker runs some software that makes his/her wireless network card look like a legitimate access point. Once the cracker has gained access, he/she can steal passwords, launch attacks on the wired network, or plant trojans. Since wireless networks operate at the Layer 2 level, Layer 3 protections such as network authentication and virtual private networks (VPNs) offer no barrier. Wireless 802.1x authentications do help with protection but are still vulnerable to cracking. The idea behind this type of attack may not be to break into a VPN or other security measures. Most likely the cracker is just trying to take over the client at the Layer 2 level , gsm pc card .

Ad-hoc network , pci interface card .

Ad-hoc networks can pose a security threat. Ad-hoc networks are defined as peer-to-peer networks between wireless computers that do not have an access point in between them. While these types of networks usually have little protection, encryption methods can be used to provide security.

Non-traditional networks

Non-traditional networks such as personal network Bluetooth devices are not safe from cracking and should be regarded as a security risk. Even barcode readers, handheld PDAs, and wireless printers and copiers should be secured. These non-traditional networks can be easily overlooked by IT personnel who have narrowly focused on laptops and access points.

Identity theft (MAC spoofing)

Identity theft (or MAC spoofing) occurs when a cracker is able to listen in on network traffic and identify the MAC address of a computer with network privileges. Most wireless systems allow some kind of MAC filtering to only allow authorized computers with specific MAC IDs to gain access and utilize the network. However, a number of programs exist that have network niffing capabilities. Combine these programs with other software that allow a computer to pretend it has any MAC address that the cracker desires, and the cracker can easily get around that hurdle.

Man-in-the-middle attacks

A man-in-the-middle attacker entices computers to log into a computer which is set up as a soft AP (Access Point). Once this is done, the hacker connects to a real access point through another wireless card offering a steady flow of traffic through the transparent hacking computer to the real network. The hacker can then sniff the traffic. One type of man-in-the-middle attack relies on security faults in challenge and handshake protocols to execute a e-authentication attack. This attack forces AP-connected computers to drop their connections and reconnect with the cracker soft AP. Man-in-the-middle attacks are enhanced by software such as LANjack and AirJack, which automate multiple steps of the process. What once required some skill can now be done by script kiddies. Hotspots are particularly vulnerable to any attack since there is little to no security on these networks.

Denial of service

A Denial-of-Service attack (DoS) occurs when an attacker continually bombards a targeted AP (Access Point) or network with bogus requests, premature successful connection messages, failure messages, and/or other commands. These cause legitimate users to not be able to get on the network and may even cause the network to crash. These attacks rely on the abuse of protocols such as the Extensible Authentication Protocol (EAP).

Network injection

In a network injection attack, a cracker can make use of access points that are exposed to non-filtered network traffic, specifically broadcasting network traffic such as panning Tree (802.1D), OSPF, RIP, and HSRP. The cracker injects bogus networking re-configuration commands that affect routers, switches, and intelligent hubs. A whole network can be brought down in this manner and require rebooting or even reprogramming of all intelligent networking devices.

Caffe Latte attack

The Caffe Latte attack is another way to defeat WEP. It is not necessary for the attacker to be in the area of the network using this exploit. By using a process that targets the Windows wireless stack, it is possible to obtain the WEP key from a remote client. By sending a flood of encrypted ARP requests, the assailant takes advantage of the shared key authentication and the message modification flaws in 802.11 WEP. The attacker uses the ARP responses to obtain the WEP key in less than 6 minutes.

Wireless Intrusion Prevention Systems

A Wireless Intrusion Prevention System (WIPS) is the most robust way to counteract wireless security risks. A WIPS is typically implemented as an overlay to an existing Wireless LAN infrastructure, although it may be deployed standalone to enforce no-wireless policies within an organization.

Large organizations with many employees are particularly vulnerable to security breaches caused by rogue access points. If an employee (trusted entity) in a location brings in an easily available wireless router, the entire network can be exposed to anyone within range of the signals.

WIPS is considered so important to wireless security that in July 2009, the PCI Security Standards Council published wireless guidelines for PCI DSS recommending the use of WIPS to automate wireless scanning and protection for large organizations.

Wireless Security Best Practices

Though a WIPS is deployed, certain wireless security best practices are recommended for every Wireless LAN deployment. Certain practices may not be possible due to deployment constraints.

MAC ID filtering

Most wireless access points contain some type of MAC ID filtering that allows the administrator to only permit access to computers that have wireless functionalities that contain certain MAC IDs. This can be helpful; however, it must be remembered that MAC IDs over a network can be faked. Cracking utilities such as SMAC are widely available, and some computer hardware also gives the option in the BIOS to select any desired MAC ID for its built in network capability.

Static IP addressing

Disabling at least the IP Address assignment function of the network’s DHCP server, with the IP addresses of the various network devices then set by hand, will also make it more difficult for a casual or unsophisticated intruder to log onto the network. This is especially effective if the subnet size is also reduced from a standard default setting to what is absolutely necessary and if permitted but unused IP addresses are blocked by the access point’s firewall. In this case, where no unused IP addresses are available, a new user can log on without detection using TCP/IP only if he or she stages a successful Man in the Middle Attack using appropriate software.

802.11 security

Main article: IEEE 802.1X

Regular WEP

Main article: Wired Equivalent Privacy

WEP stands for Wired Equivalent Privacy. This encryption standard was the original encryption standard for wireless. As its name implies, this standard was intended to make wireless networks as secure as wired networks. Unfortunately, this never happened as flaws were quickly discovered and exploited. There are several open source utilities like aircrack-ng, weplab, WEPCrack, or airsnort that can be used by crackers to break in by examining packets and looking for patterns in the encryption. WEP comes in different key sizes. The common key lengths are currently 128- and 256-bit. The longer the better as it will increase the difficulty for crackers. However, this type of encryption is now being considered outdated and seriously flawed. In 2005 a group from the FBI held a demonstration where they used publicly available tools to break a WEP encrypted network in three minutes. WEP protection is better than nothing, though generally not as secure as the more sophisticated WPA-PSK encryption. A big problem is that if a cracker can receive packets on a network, it is only a matter of time until the WEP encryption is cracked.

WEP has some serious issues. First, it does not deal with the issue of key management at all. Either the keys have to be manually given to end users, or they have to be distributed in some other authentication method. Since WEP is a shared key system, the AP uses the same key as all the clients and the clients also share the same key with each other. A cracker would only have to compromise the key from a single user, and he would then know the key for all users.

In addition to key management, a recently published paper describes ways in which WEP can actually be broken (eaknesses in the Key Scheduling Algorithm of RC4 by Fluhrer, Mantin and Shamir). This is due to a weakness in RC4 as it is implemented in WEP. If enough traffic can be intercepted, then it can be broken by brute force in a matter of an hour or two. If that weren bad enough, the time it takes to crack WEP only grows linearly with key length,…